Description
Use the display ssh-server source-ip command to display the current source IP address or the IP
address of the source interface specified for the SSH server. If neither source IP address nor source
interface is specified, the command displays 0.0.0.0.
Related commands: ssh-server source-ip.
Examples
# Display the current source IP address specified for the SSH Server.
<Sysname> display ssh-server source-ip
The source IP you specified is 192.168.1.1
peer-public-key end
Syntax
peer-public-key end
View
Public key view
Parameters
None
Description
Use the peer-public-key end command to return from public key view to system view.
Related commands: rsa peer-public-key, public-key-code begin, public-key peer.
Examples
# Exit public key view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rsa peer-public-key Switch003
RSA public key view: return to System View with "peer-public-key end".
[Sysname-rsa-public-key] peer-public-key end
[Sysname]
protocol inbound
Syntax
protocol inbound { all | ssh }
View
VTY user interface view
Parameters
all: Supports both Telnet and SSH.
1-10