Display Rmon Eventlog - 3Com 5500-EI PWR Reference Manual

Event table 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 2-2 display rmon event command output description
Event table
VALID
Description
Will cause log-trap when triggered
last triggered at

display rmon eventlog

Syntax
display rmon eventlog [ event-entry ]
View
Any view
Parameters
event-entry: RMON event entry index, in the range 1 to 65,535. If you do not specify the event-entry
argument, the logs of all the RMON events are displayed.
Description
Use the display rmon eventlog command to display the log of an RMON event.
On creating an RMON event, you can configure to record the event information into the logbuffer when
an event is triggered, thus facilitating displaying of the information. The recorded information includes:
RMON event entry Index
Current RMON event entry status
The time (in seconds) when an event log is generated (in terms of the time elapsed since the
system is started or initialized)
RMON event description.
Examples
# Display the log generated by the event entry numbered 1.
<Sysname> display rmon eventlog 1
Event table 1 owned by user1 is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
Field
2-3
Description
Index of an entry in the RMON event table
The status of the entry identified by the index is
valid.
RMON event description
The event triggers logging and an alarm trap.
Time when the latest event is triggered