Primary Accounting - 3Com 5500-EI PWR Reference Manual

The nas-ip command in RADIUS scheme view has the same function as the radius nas-ip command
in system view; and the configuration in RADIUS scheme view takes precedence over that in system
view.
You can set the source IP address of outgoing RADIUS messages to avoid messages returned from
RADIUS server from being unable to reach their destination due to physical interface trouble. It is
recommended to use a Loopback interface address as the source IP address.
Related commands: display radius scheme, radius nas-ip.
Examples
# Set source IP address 10.1.1.1 for outgoing RADIUS messages in RADIUS scheme radius1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] nas-ip 10.1.1.1

primary accounting

Syntax
primary accounting ip-address [ port-number ]
undo primary accounting
View
RADIUS scheme view
Parameters
ip-address: IP address of the primary accounting server to be used, in dotted decimal notation.
port-number: UDP port number of the primary accounting server, ranging from 1 to 65535.
Description
Use the primary accounting command to set the IP address and port number of the primary RADIUS
accounting server to be used by the current scheme.
Use the undo primary accounting command to restore the default IP address and port number of the
primary RADIUS accounting server, which are 0.0.0.0 and 1813 respectively.
In the system default RADIUS scheme "system", the default IP address of the primary accounting
server is 127.0.0.1 and the default UDP port number is 1646. In a new RADIUS scheme, the default IP
address of the primary accounting server is 0.0.0.0 and the default UDP port number is 1813.
Related commands: key, radius scheme, state.
1-42