Dhcp Server Voice-Config - 3Com 5500-EI PWR Reference Manual

address), the DHCP server will return an IP address together with the IP address of the specified TFTP
server from the interface address pool to the client.
Use the undo dhcp server tftp-server ip-address command to remove the TFTP server address from
DHCP interface address pool for the client.
No TFTP server address is specified in a DHCP interface address pool by default.
Using the dhcp server tftp-server ip-address command repeatedly will overwrite the previous
configuration.
Related commands: tftp-server ip-address.
Examples
# Specify the TFTP server IP address 10.1.1.1 in the DHCP interface address pool of VLAN-interface 1
for the client.
<Sysname> system
Enter system view, return to user view with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] dhcp server tftp-server ip-address 10.1.1.1

dhcp server voice-config

Syntax
In VLAN interface view, use the following commands to configure specified Option 184 and its
sub-options in the current DHCP interface address pool for the client:
dhcp server voice-config { ncp-ip ip-address | as-ip ip-address | voice-vlan vlan-id { enable |
disable } | fail-over ip-address dialer-string }
undo dhcp server voice-config [ ncp-ip | as-ip | voice-vlan | fail-over ]
In system view, use the following commands to configure specified Option 184 and its sub-options in
multiple DHCP interface address pools for the client:
dhcp server voice-config { ncp-ip ip-address | as-ip ip-address | voice-vlan vlan-id { enable |
disable } | fail-over ip-address dialer-string } { interface interface-type interface-number [ to
interface-type interface-number ] | all }
undo dhcp server voice-config [ ncp-ip | as-ip | voice-vlan | fail-over ] { interface interface-type
interface-number [ to interface-type interface-number ] | all }
View
VLAN interface view
Parameters
ncp-ip ip-address: Specifies the IP address of the primary network calling processor.
as-ip ip-address: Specifies the IP address of the backup network calling processor.
voice-vlan vlan-id: Specifies the voice VLAN ID, in the range of 2 to 4094.
disable: Disables the specified VLAN, meaning DHCP clients will not take this VLAN as their voice
VLAN.
enable: Enables the specified VLAN, meaning DHCP clients will take this VLAN as their voice
VLAN.
1-22