Display Ntp-Service Status - 3Com 5500-EI PWR Reference Manual

Hide thumbs Also See for 5500-EI PWR:

Table of Contents

Total associations

An S5500-EI series switch does not establish a session with its client when it works in the NTP server

mode, but does so when it works in other NTP implementation modes.

display ntp-service status

display ntp-service status

Use the display ntp-service status command to display the status of NTP services.

# View the status of the NTP service of the local switch.

<Sysname> display ntp-service status

Clock status: synchronized

Clock stratum: 4

Reference clock ID: 1.1.1.11

Nominal frequency: 100.0000 Hz

Actual frequency: 100.0000 Hz

Clock precision: 2^18

Clock offset: 0.8174 ms

Root delay: 37.86 ms

Root dispersion: 45.98 ms

Peer dispersion: 35.78 ms

Reference time: 16:30:46.078 UTC Mar 29 2007(C9689FB6.1431593E)

Table 1-2 display ntp-service status command output description

Clock status

Clock stratum

Total number of associations

Status of the local clock:

Synchronized

Unsynchronized

Stratum of the local clock

Table of Contents

5500-ei series