Multicast Route-Limit - 3Com 5500-EI PWR Reference Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

-3 192.168.3.1
Incoming Interface Address: 192.168.4.2
Previous-Hop Router Address: 0.0.0.0
Input packet count on incoming interface: 0
Output packet count on outgoing interface: 0
Total number of packets for this source-group pair: 0
Protocol: PIM
Forwarding TTL: 0
Forwarding Code: No error
Table 1-6 mtracert command output description
From last-hop router(192.168.2.2), trace
reverse path to source 192.168.4.1 via RPF
rules
-1 5.5.5.8
Incoming interface address
Previous-hop router address
Input packet count on incoming interface
Output packet count on outgoing interface
Total number of packets for this source-group
pair
Protocol
Forwarding TTL

multicast route-limit

Syntax
multicast route-limit limit
undo multicast route-limit
View
System view
Parameters
limit: Maximum number of multicast routing table entries, in the range of 0 to 256.
Field
1-11
Description
Reverse path from the last-hop router
(192.168.2.2) to the multicast source
(192.168.4.1)
Outgoing interface address of each hop, starting
from the last-hop router
Address of the interface on which (S, G) packets
arrive
IP address of the router from which this local
device receives multicast packets sent by the
source
Total number of multicast packets received on
the incoming interface
Total number of multicast packets transmitted on
the outgoing interface
Total number of packets from the specified
source forwarded by this device to the specified
group
The multicast routing protocol in use
The minimum TTL that a packet is required to
have before it can be forwarded over the
outgoing interface

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents