Tftp Source-Ip; Tftp-Server Acl - 3Com 5500-EI PWR Reference Manual

Examples
# Specify VLAN-interface 1 as the source interface that the TFTP client uses every time it connects to a
TFTP server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] tftp source-interface Vlan-interface 1

tftp source-ip

Syntax
tftp source-ip ip-address
undo tftp source-ip
View
System view
Parameters
ip-address: The source IP address that the switch uses every time it connects to a TFTP server.
Description
Use the tftp source-ip command to specify the source IP address that a TFTP client uses every time it
connects with a TFTP server. The specified IP address must exist; otherwise, a prompt appears to
show the configuration fails.
Use the undo tftp source-ip command to cancel the source IP address setting. The switch uses the IP
address of the outbound interface in the local routing table as the source IP address to connect to a
TFTP server. The destination of the outbound interface is the subnet where the TFTP server resides.
By default, no source IP address is specified for the switch to connect to the TFTP server.
Examples
# Specify 192.168.0.1 as the source IP address that the TFTP client uses every time it connects to a
TFTP server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] tftp source-ip 192.168.0.1

tftp-server acl

Syntax
tftp-server acl acl-number
undo tftp-server acl
View
System view
Parameters
acl-number: Basic ACL number, in the range 2000 to 2999.
2-6