3Com 5500-EI PWR Reference Manual page 601

Quiet period
Server response timeout value
Guest VLAN re-authenticate period
Max allowed user number
Current user number amounts to
Current domain
Silent Mac User info
Ethernet1/0/1 is link-up
MAC address authentication is Enabled
max-auth-num
Guest VLAN
Authenticate success: 1, failed: 0
Current online user number
MAC ADDR
Authenticate state
AuthIndex
Quiet timer sets the quiet period. A switch goes
through a quiet period if a user fails to pass the
MAC address authentication. The default value
is 60 seconds.
Server timeout timer, which sets the timeout time
for the connection between a switch and the
RADIUS server. By default, it is 100 seconds.
Re-authenticate timer, which sets the time
interval to reauthenticate the users in the Guest
VLAN and defaults to 30 seconds.
The maximum number of users supported by the
switch. It is 1,024 by default.
The current number of users
The current domain. It is not configured by
default.
The information about the silent user. When the
user fails to pass MAC address authentication
because of inputting error user name and
password, the switch sets the user to be in quiet
state. During quiet period, the switch does not
process the authentication request of this user.
The link connected to Ethernet1/0/1 port is up.
MAC address authentication is enabled for
Ethernet1/0/1 port.
Maximum number of MAC address
authentication users that the port can
accommodate
Guest VLAN of the port
Statistics of the MAC address authentications
performed on the port, including the numbers of
successful and failed authentication operations.
The number of the users current access the
network through the port
Peer MAC address
The state of the users accessing the network
through the port, which can be:
MAC_AUTHENTICATOR_CONNECTING:
Connecting
MAC_AUTHENTICATOR_SUCCESS:
Authentication passed
MAC_AUTHENTICATOR_FAILURE: Fail to
pass authentication
MAC_AUTHENTICATOR_LOGOFF: Offline
Index of the current MAC address with regard to
the authentication port
1-3