Reset Ftm Statistics; Set Unit Name - 3Com 5500-EI PWR Reference Manual

reset ftm statistics

Syntax
reset ftm statistics
View
User view
Parameters
None
Description
Use the reset ftm statistics command to clear FTM statistics. You can use this command together with
the display ftm command to view the packet statistics processed by FTM in a period of time, thus
analyzing fabric operation status and locating problems.
Related commands: display ftm.
Examples
# Clear FTM statistics.
<Sysname> reset ftm statistics

set unit name

Syntax
set unit unit-id name unit-name
View
System view
Parameters
unit-id: Unit ID of a device.
unit-name: Name of the specified unit, a string of 1 to 64 characters.
Description
Use the set unit name command to set a name for a device. Device name visually identifies a device
by showing its location, role in the fabric, and connected networks, thus facilitating configuration and
maintenance.
Examples
# Set the name to hello for the device with unit ID 1.
<Sysname> display xrn-fabric
Fabric name is Sysname, system mode is L3.
Unit Name
First
Second
<Sysname> system-view
Unit ID
1
2(*)
1-14