Move; Pwd - 3Com 5500-EI PWR Reference Manual

#
vlan 2
#
return
<Sysname>

move

Syntax
move fileurl-source fileurl-dest
View
User view
Parameters
fileurl-source: Name of the source file.
fileurl-dest: Name of the target file.
Description
Use the move command to move a file to a specified directory.
If the target file name is the same as an existing file, the existing file will be overwritten after the
command is executed successfully.
If the path, rather than the name of the target file is specified, the source file name is used as the target
file name by default.
Examples
# Move the file 1.txt from flash:/ to flash:/a/ within unit1, with the name unchanged.
<Sysname>move unit1>flash:/1.txt unit1>flash:/a/
Move unit1>flash:/1.txt to unit1>flash:/a/1.txt?[Y/N]:y
.
%Moved file unit1>flash:/1.txt to unit1>flash:/a/1.txt.
# Move the file flash:/22.txt to unit1>flash:/test/, and overwrite the file in the directory
unit1>flash:/test.
<Sysname>move 22.txt unit1>flash:/test
Move unit1>flash:/22.txt to unit1>flash:/test/22.txt?[Y/N]:y
The file unit1>flash:/test/22.txt exists. Overwrite it?[Y/N]:y
The file will be permanently deleted from flash, please wait.
....
%Moved file unit1>flash:/22.txt to unit1>flash:/test/22.txt.

pwd

Syntax
pwd
1-11