Schedule Reboot At - 3Com 5500-EI PWR Reference Manual

Switch is rebooting...
Starting......

schedule reboot at

Syntax
schedule reboot at hh:mm [ mm/dd/yyyy | yyyy/mm/dd ]
undo schedule reboot
View
User view
Parameters
hh:mm: Reboot time, where hh (hour) ranges from 0 to 23, and mm (minute) ranges from 0 to 59.
mm/dd/yyyy and yyyy/mm/dd: Two formats used to specify the reboot date, where yyyy (year) ranges
from 2,000 to 2,099, mm (month) ranges from 1 to 12, and the range of dd (day) depends on the specific
month. You cannot set the date 30 days later than the system current date.
Description
Use the schedule reboot at command to enable the scheduled reboot function on the current switch
and set the reboot date and time.
Use the undo schedule reboot command to disable the scheduled reboot function.
By default, no scheduled reboot is set on the switch.
The switch timer can be set to a precision of one minute, that is, the switch will reboot within one minute
after the specified reboot date and time.
Note that:
After you execute the schedule reboot at command with a specified future date, the switch will
reboot at the specified time with at most one minute delay.
After you execute the schedule reboot at command without specifying a date, the switch will
reboot at the specified time on the current day if the specified time is later than the current time, or
reboot at the specified time on the next day if the specified time is earlier than the current time.
After you execute the command, the system will prompt you to confirm. Enter "Y" or "y" for your
setting to take effect, and your setting will overwrite the previous one (if there is a setting already
exists).
If you adjust the system time by the clock command after executing the schedule reboot at
command, the configured schedule reboot at command will be invalid and the scheduled reboot
will not happen.
Related commands: reboot, display schedule reboot.
3-14