Display Dhcp-Server Interface; Reset Dhcp-Server - 3Com 5500-EI PWR Reference Manual

DHCP_INFORM messages
DHCP_RELEASE messages
BOOTP_REQUEST messages
BOOTP_REPLY messages

display dhcp-server interface

Syntax
display dhcp-server interface Vlan-interface vlan-id
View
Any view
Parameters
vlan-id: VLAN ID.
Description
Use the display dhcp-server interface command to display information about the DHCP server group
to which a VLAN interface is mapped.
Related commands: dhcp-server, display dhcp-server.
Examples
# Display information about the DHCP server group to which VLAN-interface 2 is mapped.
<Sysname> display dhcp-server interface vlan-interface 2
Dhcp-group 0 is configured on this interface
The above information indicates the VLAN-interface 2 is mapped to DHCP server group 0.

reset dhcp-server

Syntax
reset dhcp-server groupNo
View
User view
Parameters
groupNo: DHCP server group number, ranging from 0 to 19.
Description
Use the reset dhcp-server command to clear the statistics information of the specified DHCP server
group.
Field
2-10
Description
Number of the DHCP-INFORM packets received
by the DHCP relay
Number of the DHCP-RELEASE packets
received by the DHCP relay
Number of the BOOTP request packets
Number of the BOOTP response packets