Vlan-Vpn Configuration Commands; Display Port Vlan-Vpn - 3Com 5500-EI PWR Reference Manual

1

VLAN-VPN Configuration Commands

VLAN-VPN Configuration Commands

display port vlan-vpn

Syntax
display port vlan-vpn
View
Any view
Parameters
None
Description
Use the display port vlan-vpn command to display the information about VLAN-VPN configuration of
the current system.
Related commands: vlan-vpn enable, vlan-vpn inner-cos-trust, vlan-vpn tpid.
Examples
# Display the VLAN-VPN configuration of the current system.
<Sysname> display port vlan-vpn
Ethernet1/0/6
VLAN-VPN status: enabled
VLAN-VPN VLAN: 1
VLAN-VPN inner-cos-trust status: disable
VLAN-VPN TPID: 8100
Table 1-1 Description on the fields of the display port vlan-vpn command
Ethernet1/0/6
VLAN-VPN status
VLAN-VPN VLAN
Field Description
The port with the VLAN VPN feature enabled
The operation status of the VLAN VPN feature on the port
enabled indicates that VLAN VPN is enabled on the port.
You can use the vlan-vpn enable command to enable
VLAN VPN on a port.
The VLAN corresponding to the tag that the port tags
packets with, that is, the default VLAN of the port. For
descriptions on default VLAN, refer to VLAN Operation.
1-1