Display Memory Limit - 3Com 5500-EI PWR Reference Manual

Table 6-1 Description on the fields of the display memory command
Unit
System Available Memory(bytes)
System Used Memory(bytes)
Used Rate

display memory limit

Syntax
display memory limit
Mode
Any view
Parameters
None
Description
Use the display memory limit command to display the memory setting and state information of the
switch.
This command displays the current memory limit configuration, free memory, and state information
about connections, such as times of disconnection, times of reconnection, and whether the current
state is normal.
Examples
# Display the current memory setting and state information.
<Sysname> display memory limit
Current memory limit configuration information:
system memory safety: 5 (MBytes)
system memory limit: 4 (MBytes)
auto-establish enabled
Free Memory: 17506496 (Bytes)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal
Table 6-2 Description on the fields of the display memory limit command
system memory safety
Field
Field
Description
Specifies a Unit ID
Free memory size, in bytes, of the switch
Occupied memory size, in bytes, of the switch
Memory occupation rate
Description
Safety value of the switch memory.
6-2