Poe Configuration Commands; Display Poe Disconnect; Display Poe Interface - 3Com 5500-EI PWR Reference Manual

1

PoE Configuration Commands

PoE Configuration Commands

display poe disconnect

Syntax
display poe disconnect
View
Any view
Parameters
None
Description
Use the display poe disconnect command to view the current PD disconnection detection mode of the
switch.
Examples
# Display the PD disconnection detection mode.
<Sysname> display poe disconnect
The PoE disconnect mode is AC.

display poe interface

Syntax
display poe interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Port type and port number.
Description
Use the display poe interface command to view the PoE status of a specific port or all ports of the
switch.
If the interface-type interface-number argument is not specified, the command displays the PoE status
of all ports of the switch.
Related commands: poe enable, poe max-power, poe mode, poe power-management, poe
priority.
1-1