Display Multicast-Source-Deny; Mac-Address Multicast Interface - 3Com 5500-EI PWR Reference Manual

display multicast-source-deny

Syntax
display multicast-source-deny [ interface interface-type [ interface-number ] ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display multicast-source-deny command to display the multicast source port suppression
status.
With neither a port type nor a port number specified, the command displays the multicast source
port suppression status of all the ports on the switch.
With only a port type specified, the command displays the multicast source port suppression status
of all ports of that type.
With both a port type and a port number specified, the command displays the multicast source port
suppression status of the specified port.
Related commands: multicast-source-deny.
Examples
# Display the multicast source port suppression status of Ethernet 1/0/1.
<Sysname> display multicast-source-deny interface Ethernet 1/0/1
Ethernet1/0/1
The information above shows that multicast source port suppression is disabled on Ethernet 1/0/1.

mac-address multicast interface

Syntax
mac-address multicast mac-address interface interface-list vlan vlan-id
undo mac-address multicast [ mac-address [ interface interface-list ] vlan vlan-id ]
View
System view
Parameters
mac-address: Multicast MAC address, in the form of H-H-H.
interface interface-list: Specifies forwarding ports for the specified multicast MAC group address. With
the interface-list argument, you can define one or more individual ports (in the form of interface-type
interface-number) and/or one or more port ranges (in the form of interface-type interface-number1 to
Multicast-source-deny disabled.
1-8