3Com 5500-EI PWR Reference Manual page 1243

Transmit delay
Trap interval
Fast start times
Port 1 [Ethernet1/0/1] :
Port status of LLDP
Admin status
Trap flag
Roll time
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV
Table 1-4 display lldp status command output description
Field
Global status of LLDP
The current number of LLDP neighbors
The current number of CDP neighbors
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port number interface-type
interface-number
Port status of LLDP
Admin status
Trap Flag
Roll time
Number of neighbors
Number of CDP neighbors
: 2s
: 5s
: 3
: Enable
: Tx_Rx
: No
: 0s
: 5
: 2
: 0
: 12
: 5
Indicating whether or not LLDP is globally enabled
Total number of the LLDP neighbor devices
The current number of CDP neighbors
Interval to send LLDPDU
TTL multiplier
Initialization delay
Delay period to send LLDPDUs
Interval to send traps
Number of the LLDPDUs to be sent successively
when a new neighboring device is detected
Port LLDP status
Indicates whether or not LLDP is enabled on the port.
LLDP mode of the port, which can be:
TxRx. A port in this mode sends and receives
LLDPDUs.
Rx_Only. A port in this mode receives LLDPDUs
only.
Tx_Only. A port in this mode sends LLDPDUs
only.
Disable. A port in this mode does not send or
receive LLDPDUs.
Indicates whether or not trap is enabled.
LLDP polling interval. A value of 0 indicates LLDP
polling is disabled.
Number of the LLDP neighbors connecting to the port
Number of the CDP neighbors connecting to the port
1-13
Description