display ntdp device-list
Syntax
display ntdp device-list [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed information of devices in a cluster.
Description
Use the display ntdp device-list command to display the cluster device information collected by
NTDP.
Examples
# Display the list of devices collected by NTDP.
<Sysname> display ntdp device-list
MAC
000f-e20f-3901
000f-e20f-3190
Table 1-3 Description on the fields of the display ntdp device-list command
MAC
HOP
IP
PLATFORM
# Display detailed device information collected by NTDP.
<Sysname> display ntdp device-list verbose
Hostname
: 5500-EI
MAC
: 000f-e20f-1234
Hop
: 0
Platform
: 5500-EI
IP
: 100.100.1.1/24
Version:
3Com Corporation
Switch 5500-EI Software Version 3Com OS V3.03.02s56e
Copyright (c) 2004-2008 3Com Corporation and its licensors, All rights reserved.
Switch 5500-EI Switch 5500-EI-V3.03.02s56e
Cluster
:
Candidate switch
Peer MAC
HOP
IP
0
100.100.1.1/24
1
16.1.1.1/24
Field
Peer Port ID
PLATFORM
5500-EI
5500-EI
MAC address of a device collected by NTDP
Hops from this device to the collected device
IP address and mask length of the management VLAN
interface on the collected device
Platform information about the collected device
Native Port ID
1-7
Description
Speed Duplex