Dot1X - 3Com 5500-EI PWR Reference Manual

Proxy trap checker is disabled
Proxy logoff checker is disabled
Version-Check is disabled
The port is an authenticator
Authentication Mode is Auto
Port Control Type is Mac-based
ReAuthenticate is disabled
Max number of on-line users
...

dot1x

Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
System view, Ethernet port view
Parameters
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
Whether or not to send Trap packets when
detecting a supplicant system in logging in
through a proxy.
Disable means the switch does not send Trap
packets when it detects that a supplicant
system logs in through a proxy.
Enable means the switch sends Trap packets
when it detects that a supplicant system logs
in through a proxy.
Whether or not to disconnect a supplicant
system when detecting it in logging in through a
proxy.
Disable means
disconnect a supplicant system when it
detects that the latter logs in through a proxy.
Enable means the switch disconnects a
supplicant system when it detects that the
latter logs in through a proxy.
Whether or not the client version checking
function is enabled:
Disable means the switch does not checks
client version.
Enable means the switch checks client
version.
The port acts as an authenticator system.
The port access control mode is Auto.
The access control method of the port is
MAC-based. That is, supplicant systems are
authenticated based on their MAC addresses.
802.1x re-authentication is disabled on the port.
The maximum number of online users that the
port can accommodate
Information omitted here
1-4
the switch does not