Display Poe Powersupply - 3Com 5500-EI PWR Reference Manual

Description
Use the display poe interface power command to view the power information of a specific port of the
switch. If the interface-type interface-number argument is not specified, the command displays the
power information of all ports of the switch.
Examples
# Display the power information of Ethernet 1/0/10.
<Sysname> display poe interface power Ethernet1/0/10
Port power
# Display the power information of all ports.
<Sysname> display poe interface power
PORT INDEX
Ethernet1/0/1
Ethernet1/0/3
Ethernet1/0/5
Ethernet1/0/7
Ethernet1/0/9
......
<Omitted>

display poe powersupply

Syntax
display poe powersupply
View
Any view
Parameters
None
Description
Use the display poe powersupply command to view the parameters of the power sourcing equipment
(PSE).
Examples
# Display the PSE parameters.
<Sysname> display poe powersupply
Unit 1
PSE ID
PSE Legacy Detection
PSE Total Power Consumption :0 mW
PSE Available Power
PSE Peak Value
PSE Average Value
:12400 mW
POWER (mW)
0
0
0
0
0
:0
:disable
:300000 mW
:0 mW
:0 mW
1-4
PORT INDEX
Ethernet1/0/2
Ethernet1/0/4
Ethernet1/0/6
Ethernet1/0/8
Ethernet1/0/10
POWER (mW)
0
0
0
0
12400