Reset Msdp Peer - 3Com 5500-EI PWR Reference Manual

Description
Use the peer sa-request-policy command to filter the SA request messages from the specified MSDP
peer.
Use the undo peer sa-request-policy command to restore the default.
By default, the switch accepts all SA request messages from any MSDP peer.
If no ACL is specified, all SA requests will be ignored. If an ACL is specified, only those SA request
messages from the multicast groups that match the ACL rule will be processed and others will be
ignored.
Related commands: peer.
Examples
# Configure the device to accept SA request messages from MSDP peer 175.58.6.5 for multicast
groups in the range of 225.1.1.0/24 and ignore all other SA request messages.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255
[Sysname-acl-basic-2001] quit
[Sysname] msdp
[Sysname-msdp] peer 175.58.6.5 sa-request-policy acl 2001

reset msdp peer

Syntax
reset msdp peer peer-address
View
User view
Parameters
peer-address: Specifies an MSDP peer by its IP address.
Description
Use the reset msdp peer command to reset the TCP connection with the specified MSDP peer and
clear all statistics information about that MSDP peer.
Related commands: reset msdp statistics.
Examples
# Reset the TCP connection with the MSDP peer 125.10.7.6 and clear the statistics about the MSDP
peer.
<Sysname> reset msdp peer 125.10.7.6
4-16