3Com 5500-EI PWR Reference Manual page 1077

This operation may take a long time.Please wait...
Received status: Success
Directory successfully removed
sftp
Syntax
sftp { host-ip | host-name } [ port-num ] [identity-key { dsa | rsa } | prefer_kex { dh_group1 |
dh_exchange_group } | prefer_ctos_cipher { 3des | des | aes128 } | prefer_stoc_cipher { 3des |
des | aes128 } | prefer_ctos_hmac { sha1 | sha1_96 | md5 | md5_96 } | prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] *
View
System view
Parameters
host-ip: IP address of the server.
host-name: Host name of the server, a string of 1 to 20 characters.
port-num: Port number of the server, in the range of 0 to 65535. The default value is 22.
identity-key: The public key algorithm used by the publickey authentication. rsa is the default.
dsa: The public key algorithm is DSA.
rsa: The public key algorithm is RSA.
prefer_kex: Specifies a preferred key exchange algorithm. You can select either of the two algorithms.
dh_group1: Key exchange algorithm diffie-hellman-group1-sha1. It is the default key exchange
algorithm.
dh_exchange_group: Key exchange algorithm diffie-hellman-group-exchange-sha1.
prefer_ctos_cipher: Preferred client-to-server encryption algorithm. The default algorithm is aes128.
prefer_stoc_cipher: Preferred server-to-client encryption algorithm. The default algorithm is aes128.
3des: 3des_cbc encryption algorithm. Support for this keyword depends on the number of
encryption bits of the software version. The 168-bit version supports this keyword, while the 56-bit
version does not.
des: des_cbc encryption algorithm.
aes128: aes_128 encryption algorithm.
prefer_ctos_hmac: Preferred client-to-server HMAC algorithm. The default algorithm is sha1_96.
prefer_stoc_hmac: Preferred server-to-client HMAC algorithm. The default algorithm is sha1_96.
sha1: HMAC algorithm hmac-sha1.
sha1_96: HMAC algorithm hmac-sha1-96.
md5: HMAC algorithm hmac-md5.
md5_96: HMAC algorithm hmac-md5-96.
Description
Use the sftp command to establish a connection with the remote SFTP server and enter SFTP client
view.
1-35