Igmp Host-Join Vlan - 3Com 5500-EI PWR Reference Manual

In LoopBack interface view, this command does not support the port interface-list option.
Description
Use the igmp host-join port command to configure one or more ports under the current VLAN
interface as specified multicast group member(s), namely configure the port(s) as simulated member
host(s) for a specified multicast group.
Use undo igmp host-join port command to restore the default.
By default, simulated joining is disabled.
Examples
# Configure Ethernet 1/0/1 under VLAN-interface 10 as a simulated member host to join multicast group
225.0.0.1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 10
[Sysname-Vlan-interface10] igmp host-join 225.0.0.1 port Ethernet 1/0/1

igmp host-join vlan

Syntax
igmp host-join group-address vlan vlan-id
undo igmp host-join group-address vlan vlan-id
View
Ethernet port view
Parameters
group-address: Address of the multicast group to join.
vlan vlan-id: Specifies the VLAN to which the port belongs. The effective range for vlan-id is 1 to 4094.
Description
Use the igmp host-join vlan command to configure the current Ethernet port as specified multicast
group member, namely configure the port as simulated member hosts for a specified multicast group.
Use the undo igmp host-join vlan command to restore the default.
By default, simulated joining is disabled.
Related commands: igmp group-policy.
Examples
# Configure Ethernet 1/0/1 under VLAN-interface 10 as a simulated member host to join multicast group
225.0.0.1.
2-8