Igmp-Snooping Version; Igmp-Snooping Vlan-Mapping - 3Com 5500-EI PWR Reference Manual

Examples
# Disable Ethernet 1/0/1 from becoming a router port.
<Sysname> system-view
System view, return to user view with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] igmp-snooping query-pkt-deny

igmp-snooping version

Syntax
igmp-snooping version version-number
undo igmp-snooping version
View
VLAN view
Parameters
version-number: IGMP Snooping version, in the range of 2 to 3 and defaulting to 2.
Description
Use the igmp-snooping version command to configure the IGMP Snooping version in the current
VLAN.
Use the undo igmp-snooping version command to restore the default IGMP Snooping version.
This command can take effect only if IGMP Snooping is enabled in the VLAN.
Related commands: igmp-snooping enable.
Examples
# Set IGMP Snooping version to version 3 in VLAN 100.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] igmp-snooping enable
Enable IGMP-Snooping ok.
[Sysname] vlan 100
[Sysname -vlan100] igmp-snooping enable
[Sysname -vlan100] igmp-snooping version 3

igmp-snooping vlan-mapping

Syntax
igmp-snooping vlan-mapping vlan vlan-id
undo igmp-snooping vlan-mapping
View
System view
5-15