Vrrp Method - 3Com 5500-EI PWR Reference Manual

Description
Use the reset vrrp statistics command to clear the VRRP statistics information.
When you execute this command,
If neither a VLAN interface nor a VRRP group is specified, the statistics information about all the
VRRP groups on the switch is cleared.
If only a VLAN interface is specified, the statistics information about all the VRRP groups on the
specified VLAN interface is cleared.
If both a VLAN interface and a VRRP group are specified, the statistics information about the
specified VRRP group on the specified VLAN interface is cleared.
You can view the current VRRP statistics by using the display vrrp statistics command.
Related commands: display vrrp statistics
Examples
# Clear the VRRP statistics information about all the interfaces on the switch.
<Sysname> reset vrrp statistics

vrrp method

Syntax
vrrp method { real-mac | virtual-mac }
undo vrrp method
View
System view
Parameters
real-mac: Maps the real MAC address of the switch to the virtual IP address of the VRRP group.
virtual-mac: Maps the virtual MAC address of the VRRP group to the virtual IP address of the VRRP
group.
Description
Use the vrrp method command to configure the MAC-Virtual IP address mapping for VRRP groups.
You can configure to map the real MAC address of the switch to the virtual IP address of a VRRP group
or configure to map the virtual MAC address of a VRRP group to the virtual IP address of the VRRP
group.
Use the undo vrrp method command to restore the default.
By default, the virtual MAC address of a VRRP group is mapped to the virtual IP address of the VRRP
group.
Note that the mapping relationship between the MAC address and the virtual IP address must be
configured before any VRRP group is created. If a VRRP group already exists on the switch, you are not
allowed to modify the mapping relationship.
Examples
# Map the MAC address of a VLAN interface to the virtual IP address of the VRRP group.
1-5