show bridge multicast filtering
The show bridge multicast filtering Privileged EXEC mode command displays the Multicast filtering
configuration.
Syntax
•
show bridge multicast filtering vlan-id
vlan_id — A valid VLAN ID value.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
•
There are no user guidelines for this command.
Example
The following example displays the Multicast configuration for VLAN 1.
Console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port
-------
1/e14
1/e15
1/e16
Static
-----------------
Forbidden
Forward
-
Status
-----------
Filter
Forward(s)
Forward(d)
Address Table Commands
117