Type
Router Id
----
--------
INTRA
3.3.3.3
INTRA
4.4.4.4
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area
areaid — Identifier for the OSPF area being displayed.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID........................................ 0.0.0.1
External Routing.............................. Import External LSAs
Spf Runs...................................... 0
Area Border Router Count...................... 0
Area LSA Count................................ 0
Area LSA Checksum............................. 0
Stub Mode..................................... Disable
Import Summary LSAs........................... Enable
1318
OSPFv3 Commands
Cost
Area ID
Next Hop
----
--------
10
0.0.0.1
FE80::211:88FF:FE2A:3CB3
10
0.0.0.1
FE80::210:18FF:FE82:8E1
areaid
-----------------------
Next Hop
Intf
-----
vlan11
vlan12