Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 593

Table 98: Secure Management Access Configuration Summary (continued)
Field Function
Junos XML Specifies SSL certificates to be used for
management protocol encryption.
Certificate
This field is available only after you create
at least one SSL certificate.
Enable HTTP Enables HTTP access on interfaces.
Enable HTTPS Enables HTTPS access on interfaces.
Certificates tab
Certificates
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Displays digital certificates required for
SSL access to the switch.
Allows you to add and delete SSL
certificates.
Security Features for EX Series Switches Overview on page 21
Chapter 24: User and Access Management Configuration
Your Action
To enable an SSL certificate, select a certificate from the
Junos XML management protocol SSL Certificate list—for
example, new.
To enable HTTP access, select the Enable HTTP access
check box.
Select and clear interfaces by clicking the direction
arrows:
To enable HTTP access on an interface, add the
interface to the HTTP Interfaces list. You can either
select all interfaces or specific interfaces.
To enable HTTPS access, select the Enable HTTPS
access check box.
Select and deselect interfaces by clicking the direction
arrows:
To enable HTTPS access on an interface, add the
interface to the HTTPS Interfaces list. You can either
select all interfaces or specific interfaces.
NOTE: Specify the certificate to be used for HTTPS
access.
To add a certificate:
1. Have a general SSL certificate
available. See Generating SSL
Certificates for more information.
2. Click Add. The Add a Local Certificate
page opens.
3. Type a name in the Certificate Name
box—for example,
4. Open the certificate file and copy its
contents.
5. Paste the generated certificate and
RSA private key in the Certificate box.
To edit a certificate, select it and click
Edit .
To delete a certificate, select it and click
Delete.
.
new
489