Installing Nsm Software; Managing Nsm Administration; Changing The Superuser Password - Juniper NETWORK AND SECURITY MANAGER NSM3000 - QUICK START REV 1 Quick Start Manual

Installing NSM Software

Managing NSM Administration

Changing the Superuser Password

Copyright © 2010, Juniper Networks, Inc.
Use the
7. SRS Database Owner Password
The password requires a minimum of eight characters and is case-sensitive. Reenter
the password in the second text box.
Click Submit to save the options and return to the NSM Configuration Main Menu.
8.
After you submit all your configuration options, click Install to install the NSM software
on your NSM3000 appliance. Installation takes a few minutes. A status indicator shows
the progress of the installation. Wait until installation is finished before continuing to use
the Web interface.
Expand NSM Administration in the left navigation tree to access the options described
in this section. These options are available only after installing NSM.
The following sections explain how to use each of the NSM Administration options:
Changing the Superuser Password on page 17
Downloading NSM MIBS (Regional Server Only) on page 18
Exporting Audit Logs on page 18
Exporting Device Logs (Regional Server Only) on page 18
Generating Reports (Regional Server Only) on page 19
Modifying NSM Configuration Files on page 19
Backing Up the NSM Database on page 20
Changing the NSM Management IP on page 21
Scheduling Security Updates on page 21
To change the superuser password, select NSM Administration > NSM Super User
Password. See Figure 14 on page 17.
Figure 14: Change Superuser Password
Managing NSM Administration
option to enter the SRS database password.
17