Table of Contents
Advertisement
Interfaces
Configure an interface to operate in passthrough mode.
You can configure interfaces on your Connect IT 4 device to operate in passthrough mode, which
means that the device passes the IP address assigned to it on a WAN or cellular modem interface, to a
client connected to a LAN interface.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the interface or select an existing interface:
To create a new interface, for Add interface, type a name for the interface and click .
n
To edit an existing interface, click to expand the interface.
n
The Interface configuration window is displayed.
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
186
Advertisement
Table of Contents
