Changing The Display Mode - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.3.5 Changing the Display Mode

There are three types of graphic drawing mode: 1-plane, 2-plane, and 3-dimension. Press the menu
Display mode key, and by selecting one of the following display mode menus, the axis configuration for
each plane changes, and the menu display returns to normal. It is also possible to change the display mode
by setting the axis name in the input area.
(Note 1) When the display mode is changed, the graphics displayed up to that point are erased.
(Note 2) These set display mode is maintained even after rebooting the machine.
(Note 3) The display mode can be set independently at the trace function and program check function.
These settings are not linked with one another.
(Note 4) The menu axis names XYZ are compatible with the basic axes IJK. X = base axis I, Y = base axis J,
and Z = base axis K.
Display mode menu
Menu
This changes to the 1- plane display mode configured of X-Y.
XY
The X-axis display in the horizontal axis, and the Y-axis displays in the vertical axis.
This changes to the 1- plane display mode configured of Y-Z.
YZ
The Y-axis display in the horizontal axis, and the Z-axis displays in the vertical axis.
This changes to the 1- plane display mode configured of X-Z.
XZ
The X-axis display in the horizontal axis, and the Z-axis displays in the vertical axis.
Changes to 2-plane display mode composing X-Y, and X-Z.
XY/XZ
The X-axis display in the horizontal axis, and the Y-axis and Z-axis display in the vertical axis.
Changes to 2-plane display mode composing Y-X, and Y-Z.
YX/YZ
The Y-axis display in the horizontal axis, and the X-axis and Z-axis display in the vertical axis.
This changes to the three-dimensional display mode.
XYZ
A cube is displayed on the lower right of the screen.
Changing the display axis name
(1) Set the axis name and press the INPUT
key.
XYC INPUT
There are three types of display mode: 1- plane, 2- plane, and 3D. An image displays which display mode is
currently selected. The selected axis name displays for the image axis name.
Display example
<1-plane> (XY)
Details
XYZ appears the graphic display mode name.
There are 3 drawing axes: X, Y, and C.
<2-plane> (XY/XZ) <3-dimension> (XYZ)
173
4.3 Program Check (2D)
Type
C
C
C
C
C
C