Option Display Screen - Mitsubishi Electric M80 Series Maintenance Manual

M800/M80/E80 Series Maintenance Manual
1 System Basic Configuration
Display items
(6) PLC ladder file This displays the file name, file label, execution type for each PLC lad-
list der program.
Use
(a) Registration No.
(b) File name
(c) File label
(d) Execution type
Menus
Menus
This displays the software list.
S/W
config
This displays the hardware list.
H/W
config
This displays the PLC program list (file name, file label, and execution type).
Ladder
config

1.3.2 Option Display Screen

Diagn
Select the menu [Option] on the diagnosis (Diagn) screen to display the contents of the additional specifications registered
in the NC.
The additional specification items are displayed by name. If all of the additional specifications cannot be seen in one screen,
the rest of items can be displayed by pressing the page up/down keys.
Display items
Display items
(1) Option items
Details
/ keys to change the pages and refer it.
This displays the registration No. of
each PLC program file.
This displays the file name of PLC pro-
gram file.
(data of GX Developer/GX Woks2)
This displays this file label of PLC pro-
gram file.
(data of GX Developer/GX Woks2)
This displays the execution type of
PLC program.
HIGH: High-speed PLC program
MIDDLE: Middle-speed PLC program
INTIAL: Initial state of PLC program
WAIT: Standby PLC program
LOW: Low-speed PLC program
(blank): Not the target of the execution.
The list of currently usable additional specifications is displayed.
As for the currently usable items, the background color is displayed in blue.
The items set when the power supply was turned ON can be currently used.
17
Details
Details
Remarks
The total number of regis-
tration size and target file
to be executed for all proj-
ects is as follows:
M800W/M800S: 120
M80W/M80/E80: 60
Max. 8 characters
Max. 32 characters
IB-1501273-F