Screen Display Content - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Screen display content

Connection status of
the communication ports
Connection status of the communication ports
Indicates the connection status of Standard I/F-1 and I/F-2.
Listed in the table below are display items and the connection status (channel number).
Display item Channel number
PLC Ch1
Barcode Ch8
TRANS. Ch9
Host(PC) Ch9
Printer ChA
Communication status
Displays the communication status of each communication port.
The SD and RD symbols appear in white on red (
( , ) at other times. They may appear lit depending on the communication status.
The SD and RD symbols on the screen indicate normal communication or cable disconnection.
Setting example
Port
I/F-1
I/F-2
■[During normal communication (with connection to a device that supports the transparent
mode)]
The SD and RD symbols for I/F-1
■[When the connecting cable with the controller is disconnected]
Only the SD symbol next to I/F-1 blinks.
Communication error status
Remark
"PLC" appears when connected to a controller (PLC or microcomputer).
"BCR" appears when connected to a barcode reader.
"TRANS." appears when the controller that is allocated to one of the communication ports supports the
transparent mode.
"TRANS." automatically changes to "PC" when communicating with the screen design software.
"PC" appears when the controller that is allocated to one of the communication ports does not support the
transparent mode.
Appears when connected to a printer.
,
Channel number
Ch1
Ch8, Ch9
23 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
Communication status
) while data are being sent or received, and in black on gray
Controller type
MELSEC-FX
-
23.4 Communication Monitor
23
207