M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.6.4 Status during Screen Displays
The following table describes the status when displaying the delete data popup screen.
Item name
Data type
Data name
6.13.6.5 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Data type
Data name
Delete
Close
6.13.6.6 Deleting PLC Data
Normal operation
(1) Press the [DATA TYPE] menu key and select the data type you want to delete from the data type selection field.
(2) Press the [DATA NAME] menu key and enter the desired PLC data name into the data name input field.
(3) Press the [DELETE] menu key. Press the delete menu key to display the confirm delete message. If [YES] is selected,
the confirm delete message and the delete data popup screen closes and the data is deleted. The name of the deleted
PLC data is removed from the list on the file operation screen. If [NO] is selected, the confirm delete message closes and
then the system returns to the delete data popup screen.
If a password to protect against reads or reads/writes has been registered to the selected files, the cancel password screen is
displayed.
Enter the password to cancel the password.
If the password is canceled, processing will continue.
Refer to "6.21 Canceling File Passwords" for information on clearing passwords.
This is the default focus position when the screen is displayed.
This selects either programs or the data type of selected data.
This selects either blank displays or the data names of selected data.
Refer to "6.13.6.7 Closing the Delete Data Popup Screen".
This selects either the data type selection field or changes the data type selec-
tion.
This selects the data name input field.
Refer to "6.13.6.6 Deleting PLC Data".
Refer to "6.13.6.7 Closing the Delete Data Popup Screen".
Operation
Operation
363
IB-1501614-B