Ac500 (Standard) - ABB AC500 V3 Hardware Manual

Device specifications
Processor modules > AC500 (standard)

1.3.2 AC500 (standard)

1.3.2.1 PM56xx-2ETH for AC500 V3 products
Processor modules with onboard interfaces:
● PM5630-2ETH: processor module, memory 8 MB, with Ethernet support (onboard Ethernet)
– 2 network interfaces RJ45, CAN and COM1 on the terminal base.
● PM5650-2ETH: processor module, memory 80 MB, with Ethernet support (onboard
Ethernet) – 2 network interfaces RJ45, CAN and COM1 on the terminal base.
● PM5670-2ETH: processor module, memory 160 MB, with Ethernet support (onboard
Ethernet) – 2 network interfaces RJ45, CAN and COM1 on the terminal base.
● PM5675-2ETH: processor module, 160 MB, 8 GB flash disk, with Ethernet support (onboard
Ethernet) – 2 network interfaces RJ45, CAN and COM1 on the terminal base.
● XC version for use in extreme ambient conditions available
1 6 7-segment state displays with backlight
2 "Triangle" displays for "item"
3 "Square" displays for "state"
4 3 state LEDs
5 8 function keys
6 Slot for memory card
7 Label
8 Compartment for lithium battery TA521
90
9 Lithium battery TA521
10 Memory card
11 I/O bus for connection of I/O modules
12 Slot for processor module (processor module
mounted on terminal base)
13 Slots for communication modules (multiple,
depending on terminal base; unused slots must be
covered with TA524)
3ADR010278, 3, en_US 2022/01/31