ABB AC500 V3 Hardware Manual page 299

Parameter
Monitoring point of input indicator
Input type acc. to EN 61131-2
Input delay (0->1 or 1->0)
Input signal voltage
Signal 0
Undefined signal
Signal 1
Ripple with signal 0
Ripple with signal 1
Input current per channel
Input voltage +24 V
Input voltage +5 V
Input voltage +15 V
Input voltage +30 V
Max. cable length
Shielded
Unshielded
Technical data of the configurable digital inputs/outputs
Each of the configurable I/O channels is defined as input or output by the user program. This is
done by interrogating or allocating the corresponding channel.
Parameter
Number of channels per module
Distribution of the channels into groups
If the channels are used as inputs
Channels I16...I23
Channels I24...I31
If the channels are used as outputs
Channels Q16...Q23
Channels Q24...Q31
Indication of the input/output signals
Monitoring point of input/output indicator
Galvanic isolation
2022/01/31
Value
LED is part of the input circuitry
Type 1
Typ. 8 ms, configurable from 0.1 to 32 ms
24 V DC
-3 V...+5 V
> +5 V...< +15 V
Parameter
+15 V...+30 V
Within -3 V...+5 V
Within +15 V...+30 V
Typ. 5 mA
> 1 mA
> 5 mA
< 8 mA
1000 m
600 m
Value
16 inputs/outputs (with transistors)
1 group of 16 channels
Terminals 3.0...3.7
Terminals 4.0...4.7
Terminals 3.0...3.7
Terminals 4.0...4.7
1 yellow LED per channel, the LED is ON when
the input/output signal is high (signal 1)
LED is part of the input circuitry
From the rest of the module
3ADR010278, 3, en_US
Device specifications
I/O modules > Digital I/O modules
299