ABB AC500 V3 Hardware Manual page 723

Table 154: States of the 29 process LEDs
LED
DC0 to DC7
DI8 to DI15
DO8 to DO15
UP
UP3
CH-ERR1 to CH-
ERR3
1.7.3.2.11 Technical data
The system data of AC500 and S500
applicable to the standard version.
The system data of AC500-XC
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Parameter
Bus connection
Technology
Transfer rate
Transfer method
Ethernet
Expandability (S500 I/O modules)
Indicators
Adjusting elements
Quantity of input/output data
Limit of data for input and output
2022/01/31
Color OFF
Yellow Input/Output is
OFF
Yellow Input is OFF
Yellow Output is OFF
Green Process supply
voltage missing
Green Process supply
voltage missing
Red No error or
process supply
voltage missing
Ä Chapter 2.6.1 "System data AC500" on page 971 are
Ä Chapter 2.7.1 "System data AC500-XC" on page 1023 are
3ADR010278, 3, en_US
Communication interface modules (S500) > EtherCAT
ON
Input/Output is
ON
Input is ON (the
input voltage is
even displayed if
the supply
voltage is OFF)
Output is ON
Process supply
voltage OK and
initialization fin-
ished
Process supply
voltage OK
Internal error
Value
2 x RJ45
Hilscher NETX 100
10/100 Mbit/s (full-duplex)
According to Ethernet II, IEEE 802.3
100 base-TX, internal switch, 2x RJ45 socket
Up to 10 S500 I/O modules (Index C0 and
above), not available (Index below C0)
5 LEDs for state indication
2 rotary switches (used for future topology
extensions)
CI512-ETHCAT: 10 bytes input and 14 bytes
output
CI511-ETHCAT: 18 bytes input and 18 bytes
output
144 byte
Device specifications
Flashing
--
--
--
--
--
Error on one
channel of the
corresponding
group
723