ABB AC500 V3 Hardware Manual page 564

Hide thumbs Also See for AC500 V3:
Table of Contents

Advertisement

Device specifications
I/O modules > Digital/Analog I/O modules
Fig. 84: Connection of analog output loads (current)
The following measuring ranges can be configured
on page 565:
0
Current
Current
For a description of the function of the LEDs, please refer to the Diagnosis and displays /
Displays chapter
Unused analog outputs can be left open-circuited.
Internal data exchange
Digital inputs (bytes)
Digital outputs (bytes)
Analog inputs (words)
Digital outputs (words)
Counter input data (words)
Counter output data (words)
I/O configuration
The module does not store configuration data itself. It gets its parameterization data from the
master device of the I/O bus (CPU or communication interface module) during power-up of the
system.
Hence, replacing I/O modules is possible without any re-parameterization via software.
564
0 mA...20 mA
4 mA...20 mA
Ä Chapter 1.6.3.1.1.8 "State LEDs" on page 572.
Without the fast counter
3
1
4
2
0
0
3ADR010278, 3, en_US
Ä Chapter 1.6.3.1.1.6 "Parameterization"
Load 0 W...500 W
Load 0 W...500 W
With the fast counter (only
with AC500)
5
3
4
2
4
8
1 channel used
1 channel used
2022/01/31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac500-eco v3Ac500-xc v3

Table of Contents