ABB AC500 V3 Hardware Manual page 48

Device specifications
Processor modules > AC500-eCo
Data of I/Os
Type of digital
outputs
Channels for
transistor version
Channels digital
input/output con-
figurable
(valid for both
PLC version
relais or tran-
sistor)
Rated voltage
transistor
Nominal current
per transistor
channel
Channels for
relay version
Rated voltage
relay
Nominal current
per relay channel
Analog inputs
Analog outputs
Number of option
board slots
Usage of option
board
KNX address
switch
Real-time clock
(RTC)
Serial interface
Digital in/out
channels
Analog in/out
channels
Max. number of
I/O modules on
I/O bus
48
PM5012-x-ETH PM5032-x-ETH
PM5012-T-ETH: PM5032-T-ETH:
Transistor Transistor
PM5012-R-ETH: PM5032-R-ETH:
Relay Relay
4 8
(5 kHz standard (incl. 4 fast outputs for standard or 4 PWM/2 PTO
and PWM) (100 kHz/200 kHz), 4 standard outputs (5 kHz))
- 2
Relay version:
The DC channels can be used as
1 PTO/2 PWM (100 kHz) or standard
digital inputs/outputs
Transistor version:
The DC channels can only be used
as standard digital inputs/outputs
24 V DC
0.5 A resistive
4 6
100 V AC...240 V AC
or
24 V DC
2 A resistive
Optional
Optional
1 2
Each slot can be used for all type of existing option boards, same option
board for serial interface or digital/analog I/O extension can be used on
several slot per CPU.
Note: RTC option board is only for PM5012 possible.
No
TA5131-RTC No
TA5141-RS232I, TA5142-RS485/TA5142-RS485I
TA5101-4DI, TA5105-4DOT, TA5110-2DI2DOT
TA5120-2AI-UI, TA5122-2AI-TC, TA5123-2AI-RTD, TA5126-2AO-UI
0 10
3ADR010278, 3, en_US
PM5052-x-ETH PM5072-T-2ETH
PM5052-T-ETH: PM5072-T-2ETH:
Transistor Transistor
PM5052-R-ETH: -
Relay
2
Transistor ver-
sion:
The DC channels
can only be used
as standard dig-
ital inputs/outputs
-
-
-
3 3
TA5130-KNXPB
only on 1 slot
2022/01/31