ABB AC500 V3 Hardware Manual page 309

Technical data of the digital inputs
Parameter
Number of channels per module
Distribution of the channels into groups
Terminals of the channels I0 to I7
Terminals of the channels I8 to I15
Terminals of the channels I16 to I23
Terminals of the channels I24 to I31
Reference potential for all inputs
Galvanic isolation
Indication of the input signals
Monitoring point of input indicator
Input type acc. to EN 61131-2
Input delay (0 -> 1 or 1 -> 0)
Input signal voltage
Signal 0
Undefined signal
Signal 1
Ripple with signal 0
Ripple with signal 1
Input current per channel
Input voltage +24 V
Input voltage +5 V
Input voltage +15 V
Input voltage +30 V
Max. cable length
Shielded
Unshielded
2022/01/31
NOTICE!
Attention:
All I/O channels (digital and analog) are protected against reverse polarity,
reverse supply, short circuit and continuous overvoltage up to 30 V DC.
3ADR010278, 3, en_US
I/O modules > Digital I/O modules
Value
32
1 group of 32 channels
1.0 to 1.7
2.0 to 2.7
3.0 to 3.7
4.0 to 4.7
Terminals 1.9, 2.9, 3.9 and 4.9 (negative pole
of the process supply voltage, signal name
ZP)
From the rest of the module (I/O bus)
One yellow LED per channel, the LED is ON
when the input signal is high (signal 1)
LED is part of the input circuitry
Type 1
Typ. 8 ms, configurable from 0.1 to 32 ms
24 V DC
-3 V...+5 V
> +5 V...< +15 V
+15 V...+30 V
Within -3 V...+5 V
Within +15 V...+30 V
Typ. 5 mA
> 1 mA
> 5 mA
< 8 mA
1000 m
600 m
Device specifications
309