S500 - ABB AC500 V3 Hardware Manual

Device specifications
Accessories > S500
Ordering data
Part no.
1SAP 180 600 R0001
1.8.2.6 TA526 - Wall mounting accessory
Purpose If a terminal base TB5xx or a terminal unit TU5xx should be mounted with screws, the wall
mounting accessories TA526 must be inserted at the rear side first. This plastic parts prevent
bending of terminal bases and terminal units while screwing up.
Handling Handling of the wall mounting accessory is described in detail in the section Mounting and
instructions disassembling the terminal unit
sembling Terminal Bases and Function Module Terminal Bases
on page 982.
Technical data
Parameter
Weight
Dimensions
Ordering data
Part no.
1SAP 180 800 R0001

1.8.3 S500

1.8.3.1 TA523 - Pluggable label mounting
For labelling the channels of S500 I/O modules.
902
Description
TA524, dummy communica-
tion module
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
Ä "Mounting with screws" on page 984 and Mounting/Disas-
Description
TA526, wall mounting acces-
sory
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
3ADR010278, 3, en_US
Product life cycle phase *)
Active
Ä "Mounting with screws"
Value
5 g
67 mm x 35 mm x 5,5 mm
Product life cycle phase *)
Active
2022/01/31