ABB AC500 V3 Hardware Manual page 694

Device specifications
Communication interface modules (S500) > EtherCAT
1.7.3.1.6 I/O configuration
The CI511-ETHCAT does not store configuration data itself.
The analog I/O channels are configured via software.
1.7.3.1.7 Parameterization
Module parameter
Name
Module ID
Parameter length Internal
Error LED / Fail-
safe function
Check Supply
Table 145: Error LED / Failsafe function
Setting
On
Off by E4
Off by E3
On + failsafe
Off by E4 + failsafe
Off by E3 + failsafe
*) The parameters behaviourAOatCommunicationFault and behaviourDOatCommunicationFault
are only analyzed if the Failsafe-mode is ON.
694
In order to be able to use the CI51X-ETHCAT with device index C0 or above
properly, please download the corresponding device description (.xml-)files
from http://www.abb.com/plc and install them to the device repository of your
Automation Builder. This will allow you to use up to 10 Expandable S500 I/O
modules as well as the Extended Cam Switch Library with your CI51X-ETHCAT
device.
Value
Internal
On
1 )
Off by E4
Off by E3 On +
failsafe Off by E4
+ failsafe Off by
E3 + failsafe
Off
On
Description
Error LED lights up at errors of all error classes, Failsafemode off
Error LED lights up at errors of error classes E1, E2 and E3, Failsa-
femode off
Error LED lights up at errors of error classes E1 and E2 auf, Failsa-
femode off
Error LED lights up at errors of all error classes, Failsafemode on *)
Error LED lights up at errors of error classes E1, E2 and E3, Failsa-
femode on *)
Error LED lights up at errors of error classes E1 and E2, Failsafe-
mode on *)
3ADR010278, 3, en_US
Internal value Internal value,
type
48155 WORD
28 BYTE
0 BYTE
1
3
16
17
19
0 BYTE
1
1
)
Default
48155
28
0
1
2022/01/31