ABB AC500 V3 Hardware Manual page 155

The following figure shows the connection of the digital input/output module DC562:
In this connection example, the inputs/outputs C0...C7 are connected as inputs and the inputs/
outputs C8...C15 are connected as outputs.
The module provides several diagnosis functions
on page 157.
The meaning of the LEDs is described in the section State LEDs
LEDs" on page 157.
2022/01/31
Process supply voltage must be connected to UP/ZP of the module. The inputs
and UP/ZP must use the same power supply.
+
24 VDC
-
3ADR010278, 3, en_US
I/O modules > Digital I/O modules
1 --
2 C0
3 C1
4 C2
5 C3
6 C4
7 C5
8 C6
9 C7
10 ---
11 C8
12 C9
13 C10
14 C11
15 C12
16 C13
17 C14
18 C15
19 UP
20 ZP
Ä Chapter 1.6.1.1.2.6 "Diagnosis"
Ä Chapter 1.6.1.1.2.7 "State
Device specifications
155