ABB AC500 V3 Hardware Manual page 158

Device specifications
I/O modules > Digital I/O modules
Technical data
The System Data of AC500-eCo apply
on page 925
Only additional details are therefore documented below.
Parameter
Process voltage UP
Connections
Rated value
Current consumption via UP terminal
Max. ripple
Inrush current
Protection against reversed voltage
Current consumption from 24 V DC power
supply at the L+/UP and M/ZP terminals of
the CPU/communication interface module
Galvanic isolation
Isolated groups
Surge voltage (max.)
Max. power dissipation within the module
Input data length
Output data length
Weight
Mounting position
Cooling
No effects of No effects of multiple overloads on isolated multi-channel modules occur, as every channel is
multiple over- protected individually by an external fuse.
loads
Technical data of the digital inputs/outputs if used as inputs
Parameter
Number of channels per module
Distribution of the channels into groups
Connections of the channels C0 to C15
Reference potential for the channels C0 to
C15
Indication of the input signals
Input type according to EN 61131-2
158
Ä Chapter 2.5.1 "System data AC500-eCo V3"
Value
Terminal 19 for UP (+24 V DC) and terminal 20
for ZP (0 V)
24 V DC
90 mA + 0.5 A per output (max.)
5 %
0.000001 A
Yes
Ca. 10 mA
Yes, between the input/output group and the
rest of the module
1 group for 16 channels
35 V DC for 0.5 s
4.8 W
2 bytes
2 bytes
Ca. 125 g
Horizontal or vertical
The natural convection cooling must not be
hindered by cable ducts or other parts in the
switchgear cabinet.
Value
16 configurable inputs (24 V DC)
1 (16 channels per group)
Terminals 1 to 16
Terminal 20 (negative pole of the process
voltage, name ZP)
1 yellow LED per channel; the LED is ON
when the input signal is high (signal 1). The
module is powered through the I/O bus.
Type 1 sink
3ADR010278, 3, en_US
2 s
2022/01/31