ABB AC500 V3 Hardware Manual page 174

Device specifications
I/O modules > Digital I/O modules
Technical data
The System Data of AC500-eCo apply
on page 925
Only additional details are therefore documented below.
Parameter
Galvanic isolation
Isolated groups
Current consumption from 24 V DC power
supply at the L+/UP and M/ZP terminals of the
CPU/communication interface module
Max. power dissipation within the module
Weight
Mounting position
Cooling
Technical data of the digital inputs
Parameter
Number of channels per module
Distribution of the channels into groups 2 (8 channels per group)
Connections of the channels I0 to I7
Connections of the channels I8 to I15
Reference potential for the channels I0
to I7
Reference potential for the channels I8
to I15
Indication of the input signals
Monitoring point of input indicator
Input type according to EN 61131-2
Input signal range
Signal 0
Undefined signal
174
In the undefined signal range, the state LED for the inputs can be ON although
the input state detected by the module is OFF.
3ADR010278, 3, en_US
Ä Chapter 2.5.1 "System data AC500-eCo V3"
Value
Yes, between the input groups and the rest of
the module
2 (8 channels per group)
Ca. 10 mA
3.2 W
Ca. 115 g
Horizontal or vertical
The natural convection cooling must not be
hindered by cable ducts or other parts in the
switchgear cabinet.
Value
16 inputs (24 V DC / 24 V AC)
Terminals 2 to 9
Terminals 11 to 18
Terminal 1 (positive or negative pole of the process
supply voltage, signal name C0..7)
Terminal 10 (positive or negative pole of the process
supply voltage, signal name C8..15)
1 yellow LED per channel; the LED is ON when the
input signal is high (signal 1). The module is pow-
ered through the I/O bus.
LED is part of the input circuitry
Type 1 source Type 1 sink
-24 V DC +24 V DC
-5 V...+3 V -3 V...+5 V
-15 V...-5 V +5 V...+15 V
1
Type 1 AC )
24 V AC 50/60 Hz
0 V AC...5 V AC
5 V AC...14 V AC
2022/01/31