ABB AC500 V3 Hardware Manual page 711

Parameter
Output resistance (load),
as current output
Output loadability,
as voltage output
Indication of the output signals
Resolution
Settling time for full range change (resistive
load, output signal within specified tolerance)
Conversion error of the analog values
caused by non-linearity, adjustment error
at factory and resolution within the normal
range
Relationship between input signal and hex
code
Unused outputs
1.7.3.1.12 Ordering data
Part no.
1SAP 220 900 R0001 CI511-ETHCAT, EtherCAT communi-
1.7.3.2 CI512-ETHCAT
● 8 digital inputs 24 V DC
● 8 digital outputs 24 V DC, 0.5 A max.
● 8 configurable digital inputs/outputs 24 V DC, 0.5 A max.
● Cam switch functionality (see also Extended Cam Switch Library)
● Extended Cam switch functionality *)
(see also Extended Cam Switch Library)
● Module-wise galvanically isolated
● Expandability with up to 10 S500 I/O modules *)
*) Applicable for device index C0 and above.
2022/01/31
Description
cation interface module, 8 DI, 8 DO,
4 AI and 2 AO
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
3ADR010278, 3, en_US
Communication interface modules (S500) > EtherCAT
Value
0 ... 500 W
± 10 mA max.
1 LED per channel (brightness depends on the
value of the analog signal)
12 bits (+ sign)
Typ. 5 ms
Typ. 0.5 %, max. 1 %
Table Output Ranges Voltage and Current
Ä Chapter 1.7.3.1.10.3 "Output ranges voltage
and current" on page 705
Are configured as unused (default value) and
can be left open-circuited
Product life cycle phase *)
Active
Device specifications
711