ABB AC500 V3 Hardware Manual page 692

Device specifications
Communication interface modules (S500) > EtherCAT
Fig. 131: Connection of analog output loads (voltage, current)
1 1 analog load requires 1 channel
Voltage
Current
Current
The measuring ranges are described in the section Measuring Ranges
"Parameterization" on page 694
Unused analog outputs can be left open-circuited.
Assignment of the Ethernet ports
The terminal unit for the communication interface module provides two Ethernet interfaces with
the following pin assignment. The pin assignment is used for the EtherCAT master (communica-
tion module CM5xy-ETHCAT) as well.
692
1.5
AO0+
1.6
AO1+
–10 V...+10 V
1.7
AO–
1.8
UP
UP
1.9
ZP
ZP
1.7
AO–
PTC
2
1.9
ZP
-10 V...+10 V
0...20 mA
4...20 mA
Ä Chapter 1.7.3.1.10 "Measuring ranges" on page 703.
3ADR010278, 3, en_US
0...20 mA
4...20 mA
Load ±10 mA max.
Load 0...500 Ω
Load 0...500 Ω
Ä Chapter 1.7.3.1.7
1
1 channel used
1 channel used
1 channel used
2022/01/31