ABB AC500 V3 Hardware Manual page 768

Device specifications
Communication interface modules (S500) > Modbus
Parameter
Reference potential for AO0+ to AO1+
Output type
Galvanic isolation
Configurability
Output resistance (load), as current output
Output loadability, as voltage output
Indication of the output signals
Resolution
Settling time for full range change (resistive
load, output signal within specified tolerance)
Conversion error of the analog values
caused by non-linearity, adjustment error
at factory and resolution within the normal
range
Relationship between input signal and hex
code
Unused outputs
Technical data of the fast counter
Parameter
Used inputs
Used outputs
Counting frequency
Detailed description
768
Unipolar
Bipolar
3ADR010278, 3, en_US
Value
Terminal 1.7 (AO-) for voltage outputTerminal
1.9, 2.9 and 3.9 for current output
Current
Voltage
Against internal supply and other modules
-10...+10 V, 0...20 mA, 4...20 mA (each output
can be configured individually)
0...500 W
±10 mA max.
1 LED per channel (brightness depends on the
value of the analog signal)
12 bits (+ sign)
Typ. 5 ms
Typ. 0.5 %, max. 1 %
Table Output ranges voltage and current
Ä Chapter 1.7.4.1.9.3 "Output ranges voltage
and current" on page 763
Are configured as "unused" (default value) and
can be left open-circuited
Value
Terminal 2.0 (DI0), 2.1 (DI1)
Terminal 3.0 (DO0)
Depending on operation mode:
Mode 1 - 6: max. 200 kHz
Mode 7: max. 50 kHz
Mode 9: max. 35 kHz
Mode 10: max. 20 kHz
See
2022/01/31