ABB AC500 V3 Hardware Manual page 814

Device specifications
Communication interface modules (S500) > PROFINET
Interface
1.7.5.2.4 Internal data exchange
Parameter
Digital inputs (bytes)
Digital outputs (bytes)
Analog inputs (words)
Analog outputs (words)
Counter input data (words)
Counter output data (words)
1.7.5.2.5 Addressing
1.7.5.2.6 I/O configuration
The CI501-PNIO stores some PROFINET configuration parameters (I/O device identifier, I/O
device type and IP address configuration). No more configuration data is stored.
The analog/digital I/O channels are configured via software.
Details about configuration are described in Parameterization
zation" on page 815.
814
PIN
8
Shield
In corrosive environment, please protect unused connectors using the TA535
accessory.
Not supplied with this device.
For further information regarding wiring and cable types see chapter Ethernet
Ä Chapter 2.6.4.7 "Ethernet connection details" on page 997.
The module reads the position of the rotary switches only during power-up, i. e.
changes of the switch position during operation will have no effect until the next
module initialization.
3ADR010278, 3, en_US
Signal Description
NC Not connected
Cable shield Functional earth
Value
3
3
4
2
4
8
Ä Chapter 1.7.5.2.7 "Parameteri-
2022/01/31