ABB AC500 V3 Hardware Manual page 596

Device specifications
I/O modules > Digital/Analog I/O modules
Fig. 94: Use of analog inputs as digital inputs
The following measuring ranges can be configured
on page 599
Digital input
For a description of the function of the LEDs, please refer to Diagnosis and displays / Displays
Ä Chapter 1.6.3.1.2.8 "State LEDs" on page 606.
Connection of analog output loads (Voltage)
The following figure shows the connection of output loads to the analog output AO0. Proceed
with the analog output AO1 in the same way.
596
Ä Chapter 1.6.3.1.2.9 "Measuring ranges" on page 606 :
24 V
3ADR010278, 3, en_US
Ä Chapter 1.6.3.1.2.6 "Parameterization"
1 channel used
2022/01/31